- DVOP-IN-IM3-EGP48-OQ4 10 Gigabit Layer 3 4 optical 48 intelligent management POE switch
DVOP-IN-IM3-EGP48-OQ4 is an intelligent network management ten Gigabit POE Ethernet Fibre Channel switch with full intellectual property rights of Shenzhen Guangxiang. The product is based on high-performance ASIC chip technology, adopts modular structure design, and has multi-layer switching capability and line-speed routing and forwarding capability. Provides 48 10/100/1000M RJ45 electrical ports, 4 10G SFP+ optical ports, 1 Console management port, electrical ports support POE feed, POE adaptive support IEEE802.3AF, IEEE802.3AT standards, single port maximum power up to 30W, as a PoE power supply device. It can automatically detect and identify the power receiving equipment that meets the standard and supply power to it through the network cable. POE terminal devices such as wireless aps, webcams, network telephones, and building visual access control intercom can be powered by network cables to meet the demand for high-density PoE power supply in network environments.
Full gigabit line speed access, optical port uplink:
● The whole series supports the combination of "Gigabit Ethernet port + 10-Gigabit optical port connected", which is convenient for users to flexibly network and meet the networking requirements of various scenarios
● All ports support non-blocking line speed forwarding for smoother transmission
● Support IEEE 802.3x full duplex flow control and Backpressure half duplex flow control
Intelligent PoE power supply function:
● 48 10/100/1000Base-T RJ45 ports support PoE power supply, meeting the requirements of PoE power supply in scenarios such as security monitoring, telephone conference system, and wireless coverage
● Comply with IEEE 802.3af/at PoE power supply standard, automatically identify PoE devices for power supply, without damaging non-poe devices. The maximum PoE output power is 600W, and the maximum PoE output power for a single port is 30W
● PoE ports support the priority mechanism. When the remaining power is insufficient, the power supply of the port with a higher priority is protected to avoid device overload
● Support POE network management function, can be configured through the network management, PoE port power distribution, priority setting, port power status view, time scheduling, etc
Strong business processing capabilities:
● Support IEEE 802.1Q VLAN, users can flexibly divide vlans according to requirements, support Voice VLAN, support QinQ configuration
● Supports QoS, three priority modes based on port, 802.1P, and DSCP, and four queue scheduling algorithms: Equ, SP, WRR, and SP+WRR
● Supports ACL to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies
● Support IGMP V1/V2 multicast protocol, support IGMP Snooping, meet the multi-terminal HD video surveillance and video conferencing access requirements
● Support industrial fast ring network ERPS and STP/RSTP/MSTP production tree protocol, eliminate Layer 2 loops and realize link backup
● Support static aggregation and dynamic aggregation, effectively increase link bandwidth, load balancing, link backup, and improve link reliability
Complete security protection mechanism:
● Support 802.1X authentication, provide authentication function for LAN computers, and control the authorization status of controlled ports according to the authentication results
● Support port isolation.
● Supports port broadcast storm suppression
● Support port +MAC binding, IP+MAC+ port binding function
Stable and reliable equipment:
● Low power consumption, fan active cooling design, galvanized steel metal shell, excellent heat dissipation, to ensure stable operation of products
● Self-developed power supply, high redundancy design, to provide long-term stable PoE power output
● The equipment meets the national CCC standard, fully meets the CE, FCC, RoHS safety requirements, and is safe and reliable to use
● Users can easily understand the working status of the device through the power indicator (PWR), port status indicator (Link), PoE work indicator
Easy operation and maintenance management:
● Supports diversified management and maintenance modes such as Web NMS, CLI command line (Console, Telnet), SNMP (V1/V2/V3), and Telnet
● Support HTTPS, SSLV3, SSHV1/V2 and other encryption methods, more secure management
● Support RMON, system log, port traffic statistics, convenient for network optimization and transformation
● Support LLDP, convenient network management system to query and judge the communication status of the link
● Support CPU monitoring, memory monitoring, Ping detection, cable length detection
|
Model number |
DVOP-IN-M-EGP48-OG4 |
DVOP-IN-M-EGP48-OQ4 |
|
Fixed port |
48 10/100/1000Base-T POE ports (Data/Power) Four 100/1000Base-X SFP uplink optical ports (Data/Power) 1 Console port (115200,N,8,1) |
48 10/100/1000Base-T POE ports (Data/Power) 4 1/10G 10-gigabit SFP+ up-connected optical ports (Data) 1 Console port (115200,N,8,1) |
|
Network management type |
L2+ |
|
|
POE port |
Ports 1-48 support IEEE802.3af/at standard POE power supply |
|
|
Network Protocol |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T;
IEEE802.3z 1000Base-X; |
IEEE802.310BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T;
IEEE802.3z 1000Base-X; |
|
Power supply standard |
Comply with IEEE802.3af/at international standard |
|
|
Network port Characteristics |
1-48 port 10/100/1000Base-T (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
|
|
Optical port characteristics |
Gigabit SFP/ 10-gigabit SFP+ optical fiber interface, the default does not support optical modules, need to be purchased separately, (optional order mode/multi-mode, Single-fiber/dual-fiber optical module, LC) |
|
|
Forwarding mode |
Store forward (full line speed) |
|
|
Backplane bandwidth |
598Gbps (no blocking) |
|
|
Packet forwarding rate @64byte |
77.38 Mpps |
131Mpps |
|
MAC address table |
24K |
32K |
|
Packet forwarding cache |
24M |
32M |
|
Giant Frames |
9.6 K. |
|
|
Twisted pair transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) |
|
|
Optical cable |
Multi-mode: 850nm 0 to 550M (1.25G) Single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM. |
Multi-mode: 850nm 0 ~ 300M (10G) Single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM. |
|
Power supply pin |
Default, only 1/2(+), 3/6(-), 4-pin power supply is supported |
|
|
Maximum single port/average power |
30 W / 15.4 W |
|
|
Total power/input voltage |
600W (AC100-240V) |
|
|
Machine power consumption |
Standby power consumption: < 35W; Full load power consumption: < 600W |
|
|
LED indicator |
Power indicator: PWR(yellow); System indicator: SYS(yellow); Network indicator: Link/Act(yellow), Optical port: L/A(green); POE work indicator: PoE(green); |
|
|
One-button restore switch |
There are |
|
|
Matching power supply |
Built-in switching power supply, AC: 100 ~ 240V 50-60Hz 6.6A |
|
|
Operating temperature/humidity |
-20 to +55°C; 5% to 90% RH no condensation |
|
|
Store temperature/humidity |
-40 to +80°C; 5% to 95% RH no condensation |
|
|
Exterior dimensions (L*W*H) |
440 * 290 * 44.5 mm |
|
|
Net/gross weight |
< 4.8kg / < 5.5kg |
|
|
Installation method |
Desktop, 1U/19 "cabinet installation |
|
|
Lightning/protection rating |
Port lightning protection: 4KV 8/20us; Protection level: IP30 |
|
|
Safety certification |
3C;
CE mark, commercial; CE/LVD EN60950; |
|
|
Warranty period |
Switch 3 years, lifetime maintenance |
|
|
Service Characteristics |
||
|
Ports |
Support for IEEE802.3x flow control (full duplex) Port rate-based broadcast storm suppression is supported Supports rate limiting the packet traffic to and from ports, with a granularity of at least 64Kbps
Port temperature protection |
|
|
PoE management |
Support PoE power supply total power limit configuration Support PoE output power distribution per port, off /af/at Supports PoE output priority configuration for each port
PoE working status display per port |
|
|
Three layer function |
Support L2+ network management function, Support layer 3 software routing line speed forwarding, support different network segments,
Support ARP protocol for communication between different
vlans Support static route/default route, the maximum number of entries 128 |
Support L3 network management function, support IPV4/IPV6 management Support layer 3 software routing full line speed forwarding, support different network segments,
Support ARP protocol for communication between different
vlans Support static route/default route, the maximum number of entries 128 |
|
VLAN |
Supports port-based vlans (4K),IEEE802.1q Protocol-based vlans are supported VLAN based on MAC address is supported
Voice VLAN |
|
|
Port aggregation |
Dynamic LACP aggregation is supported Supports static aggregation Supports a maximum of 26 aggregation groups, and each aggregation group supports a maximum of 8 ports |
|
|
Spanning Tree |
STP support (IEEE802.1d) Support RSTP (IEEE802.1w) Support MSTP (IEEE802.1s) |
|
|
Industrial grade ring network protocol |
Supports G.8032(ERPS) with up to 255 rings and up to 254 devices per ring The self-healing time of ring network is less than 20ms |
|
|
Multicast |
Support IGMP Snooping v1/v2, up to 1024 multicast groups Supports the user quick exit mechanism Support MLD Snooping v1/v2 Support multicast VLAN |
|
|
Mirror image |
Supports bidirectional traffic mirroring of base ports |
|
|
QoS |
Support for FF-Serv QoS Supports 8 output queues per port 802.1p/DSCP priority mapping is supported
Queue scheduling mechanism (SP, WRR, SP+WRR) |
|
|
ACL |
Supports L2-L4 packet filtering, matches the first 80 bytes of a packet, and provides packets based on source MAC address, destination MAC address, source IP address, Acls are defined based on destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, and VLAN. Acls can be delivered based on port or VLAN |
|
|
Security Features |
Supports hierarchical user management and password protection Support IEEE802.1X authentication/centralized MAC address authentication Support AAA&RADIUS authentication
Supports the number limit of MAC address learning |
|
|
DHCP |
Support for DHCP Serve Support DHCP clients Support for DHCP Relay Support DHCP Snooping |
|
|
Management and maintenance |
Support Console/AUX Modem/Telnet/SSH2.0 CLI command line configuration Support WEB NMS (HTTPS supported) Support FTP, TFTP, Xmodem, SFTP file download management
SNMP V1/V2C/V3 |
|
|
System Requirements |
Web browser: Mozilla Firefox 2.5 or later, Google browser chrome V42 or later, Microsoft Internet Explorer10 or later; Ethernet cables of Category 5 and above; Class 5 and above Ethernet cables on each computer. TCP/ IP, network adapter and network operating system (such as Microsoft Windows, Linux or Mac OS X) installed on the network |
|
