- DVOP-IN-IR-EM8-OM2-SD Industrial rail loop network self-healing 100 Megabit 2 optical 8 power management network switch
- DVOP-IN-IR-EM8-OM2-SD is an industrial Ethernet Fibre Channel switch with complete intellectual property rights. It supports POE and non-POE models, STP, RSTP, MSTP, ERPS and other Ring network self-healing protocols, and adopts the latest ring network redundancy technology. It has a very low network fault self-healing time (<20ms), and can form a variety of complex optical fiber networks such as chain, ring, T-shape and tangential ring. Supports a variety of network management methods, such as: SNMP, Web browser, Telnet and RS232 console management. It has rich network management functions such as 802.1Q VLAN, 802.1p QoS, IGMP static multicast, port aggregation, port mirroring, port configuration, RSTP, MR-Ring, access control, remote monitoring, port statistics, network diagnosis, etc. All ports support non-blocking, full-line speed forwarding, providing you with strong data processing capabilities; Supports the line detection function to facilitate line troubleshooting, and has 32Kbps fine-grained port bandwidth control, which can accurately control the receiving and sending rates of each port according to different service requirements of different users, helping you allocate bandwidth resources reasonably and improve bandwidth utilization. Rich QoS control policies support priority modes based on port, 802.1p, IP TOS/DS, and TCP/UDP port numbers.
● With 2 100M optical interfaces, 8 10/100M self-applicable Ethernet ports.
● Wide operating temperature range of -40℃ ~85 ℃, suitable for industrial applications under harsh temperature conditions.
● All network ports and power ports adopt advanced bridge self-healing multi-level lightning protection design, in line with EN61000-4-2~EN61000-4-6 series international protection standards.
● DIN clamp rail mounted, with a rugged, high-strength aluminum housing of up to 5mm thickness, meeting the IP40 protection level.
● Electromagnetic compatibility in line with industrial level 4 standards, suitable for a variety of electromagnetic environment harsh occasions.
● Extremely wide limit operating temperature range, can be long-term stable operation at an extremely wide temperature of -45℃ ~85 ℃.
● Gold PCB board, with strong oxidation resistance, strong flow capacity, high long-term stability, suitable for harsh environment.
● Dual power supply 1+1 hot backup, power interface support redundant reverse connection.
● All ports support non-blocking, full-line speed forwarding, providing strong data processing capabilities.
● With 1+1 dual backup power supply mode, especially suitable for monitoring environment that can not be powered off
● With over current protection, over voltage protection, PD power classification adjustment function
● Extremely wide power supply range, support 9V~56V power supply, no need to customize to meet the 12V/24V/48V and other power supply environment.
● Standard: IEEE802.3, IEEE802.3U, IEEE802.3X, IEEE802.3Z
● Support priority queue, provide quality of service assurance QoS.
● Support IEEE802.3x full duplex flow control/half duplex back pressure flow control
● Support IEEE802.1Q VLAN Settings, support traffic control, effectively suppress broadcast storm.
● Electrical port adaptive 10M/100M, electrical port with automatic MDI/MDIX recognition and flip, adaptive full duplex/half duplex function
● Full industrial design, using imported industrial chips and devices
|
Optical index |
Wavelength: |
Single mode :1310/1550nm; DFB:1260~1610nm |
|
Fiber output power: |
0 dBm ~ -3 dBm/-5 dBm ~ -10 dBm |
|
|
Reception sensitivity: |
≤-28dBm |
|
|
Single wavelength bandwidth: |
155Mbps |
|
|
Transmission distance: |
Single mode: 100 Mbit: 0-120Km; Gigabit: 0-80km |
|
|
Maximum optical power reservation: |
15dbm/20dbm/25dbm/30dbm |
|
|
Fiber optic interface |
LC/SC/FC/ST Optional |
|
|
Network Port Indicators |
Physical interface: |
Standard RJ45 |
|
Interface rate: |
10/100M or 10/100/1000M adaptive, full duplex/half duplex |
|
|
Network media: |
Category 5 and above unshielded twisted pair cables |
|
|
Forwarding method: |
Storage forwarding, all ports support line speed forwarding |
|
|
Network protocol: |
IEEE802.3,
IEEE802.3x Flow Control, IEEE 802.3z, IEEE 802.3u, IEEE 802.3AB |
|
|
Flow Control: |
IEE802.3X/IEE802.3Z Full duplex flow control and half duplex flow control |
|
|
Line sequence: |
Adaptive MDI/MDIX direct connection and cross-connection mode |
|
|
Management protocol: |
FR
Ring,IGMPv1/v2, GVRP, SNMPv1 /v2c/v3, DHCP Cl ent, TFTP, SMTP, RMON |
|
|
Exchange parameters: |
Priority
queue :4, Number of vlans :256, VLAN ID:1 ~ 4094, number of multicast groups
:256, MAC table :8K |
|
|
Power supply/Power |
Power supply method: |
5 VDC / 9 VDC / 12 dc / 24 VDC / 48 VDC / 220 vac is optional |
|
Maximum power consumption: |
<2A@5VDC |
|
|
Feed protection: |
Overload
protection: |
|
|
Environmental Parameters |
Operating temperature: |
-30℃ ~ +70℃ |
|
Storage temperature: |
-45℃ ~ +85℃ |
|
|
Relative humidity: |
5 to 95% condensation free |
|
|
machine |
Enclosures: |
Naturally cooled, fanless, IP40 protection rating |
|
Installation method: |
Wall mount/desktop mount |
