- DVOP-IN-IR-EM4-OM2-SD Industrial rail loop network self-healing 100 Megabit 2 optical 4 electrical network switch
DVOP-IN-IR-SD series is an industrial Ethernet Fibre Channel switch with complete intellectual property rights. It supports POE and non-POE models and supports STP, RSTP, MSTP, ERPS and other ring network self-healing protocols. It supports two loop optical ports or two branch optical ports, and can form a variety of complex optical fiber networks such as chain, ring, T-shape, and tangential ring. Supports a variety of network management methods, such as: SNMP, Web browser, Telnet and RS232 console management. It has rich network management functions such as 802.1Q VLAN, 802.1p QoS, IGMP static multicast, port aggregation, port mirroring, port configuration, RSTP, MR-Ring, access control, remote monitoring, port statistics, network diagnosis, etc. All ports support non-blocking, full-line speed forwarding, providing you with strong data processing capabilities; Supports the line detection function to facilitate line troubleshooting, and has 32Kbps fine-grained port bandwidth control, which can accurately control the receiving and sending rates of each port according to different service requirements of different users, helping you allocate bandwidth resources reasonably and improve bandwidth utilization. Rich QoS control policies support priority modes based on port, 802.1p, IP TOS/DS, and TCP/UDP port numbers.
● Maximum 2 100M optical interfaces, 4
10/100M self-applicable Ethernet ports
● Wide operating temperature range of -40℃
~ 85 ℃, suitable for industrial applications under harsh temperature conditions
● Support STP, RSTP, MSTP, ERPS and other
ring network self-healing protocols
● All network ports and power ports adopt
advanced bridge self-healing multi-level lightning protection design, in line
with EN61000-4-2~EN61000-4-6 series international protection standards
● DIN clamp rail mounted, with a rugged,
high-strength aluminum housing of up to 5mm thickness, meeting the IP40
protection level
● Electromagnetic compatibility in line
with industrial level 4 standards, suitable for a variety of electromagnetic
environment harsh occasions
● Extremely wide limit operating
temperature range, can be long-term stable operation at an extremely wide
temperature of -45℃ ~ 85 ℃
● Gold PCB board, with strong oxidation
resistance, strong flow capacity, high long-term stability, suitable for harsh
environment
● Dual power supply 1+1 hot backup, power
interface support redundant reverse connection
● Support a variety of network management
methods, such as: SNMP, Web browser, Telnet and RS232 console management
● Support command line interface (CLI),
easy to quickly configure the main management functions
● Bandwidth management: Support port
aggregation, port speed limiting, broadcast storm suppression
● Support IEEE 1588 PTP V2 (Precision Time
Protocol) to achieve accurate network time synchronization
● Support QoS and ToS/ DffServ for traffic
control and management DHCP Opt on 82 is used to assign IP addresses with
different policies
● Support link aggregation to optimize
bandwidth utilization
● Supports TACACS+, IGMP Snooping and GMRP
to filter multicast traffic
● Use RMOn to effectively improve network
monitoring and forecasting capabilities
● Support port-based VLAN, IEEE 802.1Q VLAN
and GVRP protocols, easy network planning
● Support bandwidth management to ensure
network stability
● Port mirroring is supported
● Support port locking based on MAC address
to prevent illegal intrusion
● Support Ethernet/ IP and Modbus/TCP
protocols for device management and control
● Automatic alarm is realized through E-mal
and relay output
● Support multicast and broadcast storm
control
● All ports support non-blocking, full-line
speed forwarding, providing strong data processing capabilities
● Extremely wide power supply range,
support 9V~56V power supply, no need to customize to meet the 12V/24V/48V and
other power supply environment
● Standard: IEEE802.3, IEEE802.3U,
IEEE802.3X, IEEE802.3Z
● Support priority queue, provide quality
of service assurance QoS
● Support IEEE802.3x full duplex flow
control/half duplex back pressure flow control
● Support IEEE802.1Q VLAN Settings, support
traffic control, effectively suppress broadcast storm
● Electrical port adaptive 10M/100M,
electrical port with automatic MDI/MDIX recognition and flip, adaptive full
duplex/half duplex function
● Full industrial design, using imported industrial chips and devices
|
Optical index |
Wavelength: |
Single mode :1310/1550nm; DFB:1260~1610nm |
|
Fiber output power: |
0 dBm ~ -3 dBm/-5 dBm ~ -10 dBm |
|
|
Reception sensitivity: |
≤-28dBm |
|
|
Single wavelength bandwidth: |
155Mbps |
|
|
Transmission distance: |
Single mode: 0-80km |
|
|
Maximum optical power reservation: |
15dbm/20dbm/25dbm/30dbm |
|
|
Fiber optic interface |
Standard LC, SC/FC/ST optional |
|
|
Network Port Indicators |
Physical interface: |
Standard RJ45 |
|
Interface rate: |
10/100M adaptive, full duplex/half duplex |
|
|
Network media: |
Category 5 and above unshielded twisted pair cables |
|
|
Forwarding method: |
Storage forwarding, all ports support line speed forwarding |
|
|
Network protocol: |
IEEE802.3, IEEE802.3x Flow Control, IEEE 802.3z, IEEE 802.3u, IEEE 802.3AB, IEEE802.3x, IEEE 802.1D-2004 STP, IEEE 802.1w Rap d STP, IEEE 802.1Q VLAN Tag, IEEE 802.1p CoS, IEEE 802.1X Authentication, IEEE 802.3ad link aggregation |
|
|
Flow Control: |
IEE802.3X/IEE802.3Z Full duplex flow control and half duplex flow control |
|
|
Line sequence: |
Adaptive MDI/MDIX direct connection and cross-connection mode |
|
|
Management protocol: |
OPRing,IGMPv1/v2, GVRP, SNMPv1 /v2c/v3, DHCP Cl ent, TFTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, GVRP SSH, SNMP INform, LLDP, SNTP Server/Cl ent,PVLA |
|
|
Exchange parameters: |
Priority queue :4, Number of vlans :256, VLAN ID:1 ~ 4094, number of multicast groups :256, MAC table :8K, packet buffer :1Mb t, packet forwarding rate :5.3Mpps, switching delay :<5 μs |
|
|
Alarm output |
Interface: |
Industrial crimp terminals |
|
Alarm contents: |
Two relay IP/MAC conflict, support power, port and ring alarm |
|
|
Power Supply/Power |
Power supply method: |
9VDC/12DC/24VDC/48VDC fully compatible |
|
Maximum power consumption: |
< 0.5 A @ 24 VDC |
|
|
Feed protection: |
Overload protection: Supported Reverse protection: Supported Redundancy protection: Supported |
|
|
Environmental parameters |
Operating temperature: |
-40℃ ~ +85℃ |
|
Storage temperature: |
-45℃ ~ +85℃ |
|
|
Relative humidity: |
5 to 95% condensation free |
|
|
Mechanical |
Enclosures: |
Naturally cooled, fanless, IP40 protection rating |
|
Installation method: |
Rail mount/wall mount |
|
|
Dimensions: |
138 x 115 x 60mm (W x D x H) |
|
|
Weight: |
750g |
