- DVOP-IN-I-EG1-OG1-SD DIN Cable-rail gigabit industrial fiber transceiver
- DVOP-IN-I-EG1-OG1-SD is an industrial unmanaged 100 gigabit optical transceiver with 1 optical and 1 electrical port. It has one 10./100/1000M adaptive electrical port and one 1000M optical port. It has 1+1 two hot spare power inputs and one relay alarm output. Suitable for industrial environments with harsh temperatures ranging from -40 ° C to 85 ° C, it supports DIN rail mounting and features a rugged, high-strength aluminum housing up to 5mm thick and meets IP40 protection, making it a plug and play, lightweight and highly trusted industrial Ethernet switch solution. The device supports an extremely wide power supply range of 9V~56V, and can meet various power supply environments such as 12V/24V/48V without customization. The power supply has redundant anti-reverse connection. All interfaces adopt advanced bridge self-healing multi-stage lightning protection design, ESD up to 8KV in line with EN61000-4-2 standards, 4KV in line with EN61000-4-5 and other standards. DVOP-IN-I-EG1-OG1-SD adopts metal-sunk PCB board, in line with IPC standards, adopts industrial-grade design, adopts imported industrial-grade chips and devices, and can operate stably for a long time at an extremely wide temperature of -45℃ ~ 85 ℃. It is not affected by environmental interference, high transmission quality, long-term stable work, installation and maintenance are simple, no need to debug and other characteristics, electromagnetic compatibility meets the industrial level four standards.
|
Optical index |
Wavelength: |
Single mode :1310/1550nm; DFB:1260~1610nm |
|
Fiber output power: |
0 dBm ~ -3 dBm/-5 dBm ~ -10 dBm |
|
|
Reception sensitivity: |
≤-28dBm |
|
|
Single wavelength bandwidth: |
1.25 Gbps |
|
|
Transmission distance: |
Single mode: 0-80km |
|
|
Maximum optical power reservation: |
15dbm/20dbm/25dbm/30dbm |
|
|
Fiber optic interface |
Standard SC, FC/ST optional |
|
|
Network Port Specifications |
Physical interface: |
Standard RJ45 |
|
Interface rate: |
10/100/1000M adaptive, full duplex/half duplex |
|
|
Network media: |
Category 5 and above unshielded twisted pair cables |
|
|
Forwarding method: |
Storage forwarding, all ports support line speed forwarding |
|
|
Flow Control: |
IEE802.3X/IEE802.3Z Full duplex flow control and half duplex flow control |
|
|
Line sequence: |
Adaptive MDI/MDIX direct connection and cross-connection mode |
|
|
Exchange parameters: |
MAC table :8K, packet buffer :1Mb t, packet forwarding rate :5.3Mpps, exchange delay :<5 μs |
|
|
Alarm output |
Interface: |
Industrial crimp terminals |
|
Alarm contents: |
Two relay IP/MAC conflict, support power, port and ring alarm |
|
|
Power Supply/Power |
Power supply method: |
9VDC/12DC/24VDC/48VDC fully compatible |
|
Maximum power consumption: |
< 0.5 A @ 24 VDC |
|
|
Feed protection: |
Overload protection: Supported Reverse protection: Supported Redundancy protection: Supported |
|
|
Environmental parameters |
Operating temperature: |
-40℃ ~ +85℃ |
|
Storage temperature: |
-45℃ to +85℃ |
|
|
Relative humidity: |
5 to 95% condensation free |
|
|
Mechanical |
Enclosures: |
Naturally cooled, fanless, IP40 protection rating |
|
Installation method: |
Rail mount/wall mount |
|
|
Dimensions: |
143 x 104 x 45mm (W x D x H) |
|
|
Weight: |
750g |
