- DVOP-OTM-EM1-OM1 100 gigabit embedded fiber transceiver module
DVOP-OTM-EM1-OM1 100 megabit embedded optical fiber transceiver is an ultra-small optical fiber transceiver, especially suitable for embedding in various devices such as cameras/intercom, so as to achieve the original device optical fiber transmission module level transceiver. OTE adopts imported chips and new high-quality optical modules with stable performance and excellent quality. DVOP-OTE-EM1 complies with IEE802.3, IEEE802.3u, 100Base-TX/FX, supports full-duplex IEEE802.3x, IEEE802.3z flow control and half-duplex flow control standards, supports ultra-long frame transmission, and is fully compatible with forwarding of various extended protocol data frames. Automatically identifies MDI/MDI-X crossover lines and supports full duplex/half duplex mode.
● Ultra-small 100 Mbit transceiver, built-in only 3mm diameter fixed hole can be embedded;
● 1 10/100M adaptive electrical port and 1 optical port to achieve photoelectric signal conversion between twisted pair and optical fiber
● Support ultra-long frame transmission, and are fully compatible with forwarding of various extended protocol data frames
● Compliant with IEEE802.310Basc-T, IEEE802.3u100Base-TX/FX, full-duplex IEEE802.3X/IEEE802.3Z and half-duplex backpressure flow control
● Automatic recognition of MDI/MDI-X cross lines, supporting full duplex/half duplex mode
● Standard 5VDC on-board power supply, and can choose a variety of power supply modes such as 12VDC on board or POE
● Power supply adopts crimping terminal without welding wire; The Ethernet port uses a standard RJ45 socket and supports cable access mode
● With perfect feed, optical path, electrical port indicator, the working state is clear
● Fiber mode optional multi-mode/single mode, single fiber/double fiber; The optical fiber port can be SC/FC/ST
● Optical transmission distance optional: multi-mode 2Km/5Km; Single-mode 20 km / 40 km / 60 km / 80 km / 100 km / 120 km
● Product size: 38mm(L)*56.5mm(W)*18mm(H)
● The office supports centralized rack-mounted card installation, using a 2U rack, and a single rack can hold a maximum of 16 pieces
① Optical port specifications
Wavelength: 1310nm/1550nm
Fiber output power: 0dBm to -3dBm/-5dBm to -10dBm/-10 to -16dBm
Number of fiber cores: 1, 2 optional
Optical port speed: 155Mbps
Receiving sensitivity: ≤-31dBm
No relay transmission distance: single mode: 0-80Km; Multi-mode: 0-2Km
Maximum optical power reserved: 15dbm/20dbm/25dbm/30dbm
Optical interface type: FC/SC/ST Optional
② Ethernet interface specifications
Physical interface: Shield more than 5 RJ-45 seats
Electrical transmission distance: 100 meters
Interface speed: 10M/100M adaptive, full duplex/half duplex
Interface standards: IEEE802.310Base-T, IEEE802.3u 100Base-TX
Flow control: IEE802.3X full duplex flow control and half duplex flow control
Interface sequence: adaptive MDI/MDIX direct connection and cross-connection mode
③ Working environment
Operating temperature: -20℃ ~ +70℃
Relative humidity: 5 ~ 95% no condensation
